Silencer Ring Removal
 Your going to need two small flat screwdrivers to pry the snap ring out of the groove. As you see in the top picture one side has a tip that you can pry against. |
 Once the snap ring is out just tip the silencer ring out. |
 This is your turbo now without a silencer ring. |
Remember removing the silencer ring will not improve performance at all. There is no gain in horse power or torque numbers. This has been tested on a dyno and no improvements have been found from removing the silencer ring.
But you will notice a whistling noise as the turbo spools up... That's it!